Lab grown diamonds are real diamonds. Yes, you read that right. They have the same shine, the same hardness, and the same beauty as mined diamonds. The only difference is that they came from a lab instead of deep underground.
But here's the thing nobody tells you: even the most beautiful diamond gets dull and dirty over time. Lotions, soap, skin oils, and everyday dust slowly build up on the surface. And when that happens, your diamond stops sparkling the way it should.
The good news? Cleaning your lab grown diamond is super easy. You don't need to go to a jeweler. You don't need fancy tools. Everything you need is probably already sitting in your home right now.
Let's get into it.
Why Do Lab Grown Diamonds Get Dirty?
Think about it this way. Every time you wash your hands, cook food, put on sunscreen, or even just touch your ring, tiny bits of oil and residue stick to the diamond. Over days and weeks, this builds up like a thin film of fog on a window.
That film blocks light from bouncing around inside the diamond. And light bouncing around is exactly what creates that gorgeous sparkle. So the dirtier the diamond, the less it shines.
The Easiest Way to Clean Your Lab Grown Diamond at Home
This method works like magic and takes less than 10 minutes.
What you'll need:
-
A small bowl
-
Warm water (not boiling, just warm)
-
A few drops of mild dish soap
-
A soft toothbrush (an old one works perfectly)
-
A clean, lint-free cloth
Steps:
Step 1 — Make your cleaning mix. Fill the bowl with warm water and add two or three drops of dish soap. Give it a gentle stir. That's your cleaning solution. Simple, right?
Step 2 — Soak the diamond. Drop your jewelry into the bowl and let it sit for about 20 to 30 minutes. This loosens up all the built-up oils and grime. You're basically giving your diamond a relaxing bath.
Step 3 — Gently scrub. After soaking, take the soft toothbrush and gently scrub around the diamond and the setting. Pay special attention to the back of the stone; that's where most of the buildup hides. Use light, small circles. Don't scrub hard. The soap does most of the work.
Step 4 — Rinse it off. Hold the jewelry under warm running water to wash away all the soap. Make sure your drain is plugged or use a strainer; you don't want to accidentally drop it down the sink!
Step 5 — Dry it properly. Pat it dry with a clean, lint-free cloth. Then let it air dry for a few minutes before wearing it. Done. Your diamond should look noticeably brighter already.
Things You Should Never Do
Now here's the important part. Some cleaning methods people use can actually damage your jewelry. Watch out for these:
Don't use toothpaste. It feels like a cleaning product, but it's actually abrasive. It can scratch the metal setting around your diamond.
Don't use bleach or harsh chemicals. These can damage the metal, especially if your diamond is set in gold or silver.
Don't use boiling water. Extreme heat can sometimes cause small cracks in the metal setting or loosen the prongs holding your diamond in place.
Don't use paper towels to dry. They feel soft but are actually rough on metal. Always use a soft cloth.
How Often Should You Clean It?
For everyday jewelry like rings, aim for once every one to two weeks. If you wear it every day, it picks up dirt every day. Regular cleaning keeps it looking its best without any big buildup.
For necklaces or earrings you wear occasionally, once a month is totally fine.
One More Pro Tip
Once or twice a year, take your lab grown diamond jewelry to a professional jeweler for a deep cleaning. They use special ultrasonic machines and tools that can clean in places your toothbrush can't reach. It also gives them a chance to check that all the prongs and settings are still secure.
Final Thoughts
Your lab grown diamond deserves to shine every single day. And keeping it clean doesn't have to be complicated or expensive. Warm water, a little soap, and a soft brush are all it takes.
Take care of your diamond, and it will keep turning heads for a lifetime.
